CLA-18SK is the sub woofer which 18" premium high output driver is settled can be used with CLA-8K or can be used by itself. The cone type woofer driver that has high output and used Long-Excursion method of CLA-18SK is settled on the front panel and the reflect sound on back side is designed for helping reinforcement of low level by fort. CLA-18SK is can be used for diverse types with full range of CLA-8K speaker. The frying type is possible when CLA-18SK is settled on top of CLA-8K speakers and ground stack is also possible if the CLA-18SK stand on the ground and then put on CLA-18SK. CLA-18SK can be used as subwoofer for reinforcement of low sound with CLA-8K when it set up on the bottom depend on needs.
- High quality driver
CLA-K series used the high quality driver for producing of dynamic sound and enough low sound. The driver that is used
for CLA-K has consistent quality and high durability and can be helped to operate stably under diversity circumstances.
LF driver use the forced cooling system for maximum of thermal efficiency and driver for high sound use titanium having
low harmonics for playing without any distortion of sound.
The line array uses the ware guide for the minimizing of mutual interruption. This guide make to change the source of
high sound from circular wave to linear wave so the mutual interruption become minimized when several speaker installed
as one array. Also, the design of CLA-K series are optimized for size of waveguide and CLA-K series improve the character
of high sound.
- Compact size of acoustic enclosure
Module type of speaker as present line array needs the compact size for interior. The enclosing is designed for providing both
powerful low sound and high sound pressure. So, even the compact size of CLA-K series can be working very well. Also, the
clear sound can be provided as blocking of internal resonance and absorbing of unnecessary energy by high density of
sound- absorbing material.
- Strong and accurate rigging system
The rigging system that used for CLA-K series was made for the safe installation of flying, so it is possible to install strongly.
The control of array for one degree can be possible from 0 degree to 10 degree and Based on the safe rate,5:1, 24 boxes of
CLA-5K can be installed for one array and 16 boxes of CLA-8K can be made for one array. Also, the version of touring and
outdoor one can be supplied if the customer requests.
- Strong enclosure- VOID FREE
Selection of wood and bonded process system are important source for high quality speaker. CLA series was made of premium
Birch plywood which made in North Europe and there is no resonance according to vacant in plywood. The increasing durability
and minimization of leaking sound can be possible by ‘DADO’ connection method of enclosure that made by the premium wood
and the accurate process.
- Support of EASE, EASE Focus data
CLA-K series basically supports the EASE DATA that supports the “EASE FOCUS” software. The EASE Focus supports the
simple simulation for installation companies and operators and they do not need to purchase this software because it can be
downloaded at the internet. For more exact simulation, the system designer can test the same file at EASE software, and it
can be estimated more accurately by 3D type of data.
|Type||2Way Bi-amp Compact Line Array Speaker||Line Array Subwoofer|
|Frequency Range (±3dB)||150Hz ~ 20kHz||37Hz ~ 2kHz|
|Frequency Response (-10dB)||103Hz ~ 20kHz||30Hz ~ 3kHz|
|Rated Power (AES)||LF : 450W/HF : 60W||800W|
|Rated Power (Program)||LF : 900W/HF : 120W||1600W|
|Rated Power (Peak)||LF : 1800W/HF : 240W||3200W|
|Recommended Amplifier Power||LF : 900W/HF : 120W||1600W|
|Sensitivity (1W/1m)||LF : 98dB SPL/HF : 105dB SPL||98dB|
|Maximum SPL (Peak)||LF : 124.6dB|
HF : 122.69dB
|Nominal Dispersion||90° H/10° V||OMNI|
|Nominal Impedance||LF : 16Ω/HF : 16Ω||8Ω|
|Crossover Point||1,400Hz, 24dB/oct, LR Filter||100Hz, 24dB/oct, LR Filter|
|LF Driver||8" Woofer 2" voice coil||18" Woofer 4" voice coil|
|HF Driver||1" Twitter 1.4" voice coil||-|
|Horn||Constant directivity horn |
with Precision waveguide
|Enclosure Material||15T Birch Plywood, Polyurea Coating||15T Birch Plywood, Polyurea Coating|
|Grille||SECC 1.5t, Powder Coating / BLACK||SECC 1.5t, Powder Coating / BLACK|
|Connection||2 X SPEAKON (1+,1- : LF / 2+,2- : HF) [Parallel]||2 X SPEAKON(1+,1-) [Parallel]|
|Fittings/Suspension||4Point flying rigging|
0°~10° variable angle(1°step)
|4Point flying rigging|
|Finish||Polyurea Coating||Polyurea Coating|
|Dimensions (Net, W×H×D)||694×256×486mm/27.3×10.1×19.1in||694×520×870mm/27.3×20.5×34.3in|
|Optional Accessories||CLA-8K Frame||CLA-8K Frame|
Inter-M International (Korea HQ)
TEL: (82) 2 2289 8145
FAX: (82) 2 2289 8149
Inter-M Americas (USA, Canada and Latin America)
TEL: (714) 828 2200
FAX: (714) 828 2210
A leading Korean based manufacturer of audio, video, communications, and information technology products
© Inter-M Americas. All right reserved