The D-6000 is a high power professional amplifier specially designed for the sound re-enforcement market also referred to as SR,
which incorporates a DSP, Digital Signal Processor and Audinates’s Dante™ digital audio network.
Dante delivers low latency, robust synchronization, I/O scalability, and installation simplicity via standard IT technology.
The D-6000 will deliver up to 4800 watts of power per channel down to 4 ohm loads. Housed in two RU compact frameworks,
the D-6000 Class D amplifier offers high power with reduced size and weight.
The combination Class D topology amplification circuitry combined with SMPS (Switch Mode Power Supplies) creates a high
efficiency amplifier that offers reduced power consumption and low heat dissipation. The D-6000 is ideal for applications where
high power and efficiency is required. This may include House of warship, arenas, stadiums, concert venues, touring or any other
- High-Power, high performance 2 channel Class-D Power Amplifier
High-Power, high performance Class-D Professional Amplifier has up to 4800W (2400W+2400W) power output.
- DANTE Audio Network Transmission Solution Technology
By utilizing Audinate’s DANTE TM Solution, audio reception is possible via TCP/IP Ethernet Network.
- Built-in high performance DSP engine
High performance DSP (Digital Signal Processor) is built in to control the Digital Audio signals.
- Webpage (CGI) control & Monitoring
Via TCP/IP Ethernet Network, adjustments and monitoring of DSP is possible from remote location.
* Please download the Webpage operation methods from the Inter-M homepage(international.inter-m.net/en).
- Complete Protection Circuits
Complete circuit protection is activated in case of amplifier overheating, output shorting, overload, over power
and DC output.
- SMPS (Switching Mode Power Supply) power scheme
High efficient, light weight SMPS power system is utilized.
- Powerful and detailed sound quality
High S/N ratio and Low THD reproduces powerful and detailed sound.
- Operation Indicator LED
LED display to check the operating status (ACT, STBY, POWER, SIG, -10dB, CLIP, PROTECT)
| Rated Output
|8Ω per channel, stereo||1200W|
|4Ω per channel, stereo||2400W|
|2Ω per channel, stereo||-|
|Input Sensitivity (rated output power@8Ω)||2Vrms|
|Voltage Gain (rated output power@8Ω)||34dB|
|Frequency Response||20Hz ~ 20kHz, 0dB ±3dB|
|THD (1/3 rated output power @8Ω)||Less than 0.1%|
|Residual Noise (Volume MAX@8Ω)||-|
|S/N (rated output power@8Ω, 20Hz~20kHz)||100dB|
|Output Circuit||Class D|
|Input Impedance||10 kΩ Balanced|
|Indicator||SIG(-30dB, -10dB), Clip, Prot|
|Safety Circuit||Full Short Circuit Protection, Thermal Protection|
|Power ON/OFF Muting, DC Output Protection|
|DSP Function||Input volume, LPF, HPF, Delay, Limiter,7-band EQ, Output level meter|
|Input Terminal||Analog: XLR Female, Digital: Dante Network Audio|
|Output Terminal||4 Pole Speaker Socket|
|Operating Temperature / Humidity||Operating Temperature: -10℃ ~ +40℃|
|Humidity: 0% ~ 90%|
(Supplied AC mains transformer depends on country requirements)
|Power Consumption (1/8 rated output power @4Ω)||850W|
|Weight(set)||9.26kg / 20.41lb|
|Dimensions(set)||482(W) x 88(H) x 420(D)mm / 19(W) x 3.5(H) x 16.5(D)in|